LH-LX Torana Electric Windows Conversion.

Rear Windows

http://www.gmh-torana.com.au/forums/topic/30070-torviki-rear-power-windows/

VP to VT rear door power window actuators.

You will need to add a small spacer behind

Drill a 4.8mm hole through the top of the bracket on the other side and rivet it in the uppermost position.

Run your wires out through the bottom of the door near the lower hinge area.

(If you exit the wiring out the side of the door your can use a rubber connector to cover the wires as they go into the pillar. There is a small hole at the base of the pillar where they can exit into the cabin - ender)

You can either spread the lower mount and rivet it to the door or cut a small relief in the door like I did and rivet it in place.

Either way the slider has to be closer to the doorskin or the window will catch.

	Pop the white plastic driving part off it's gymble.

 

[ Home ] [ Accessory Drive ] [ Bonnet Hinges ] [ Cooling ] [ Calculators ] [ Conversion Parts ] [ Drivetrain ] [ Electric Windows ] [ Engine ] [ Engine Install ] [ Engine Mounts ] [ Fuel Tank ] [ Interior ] [ Movies ] [ Oil Pans ] [ Power Steering ] [ Seat Rails ] [ Specifications and NCOP ] [ Starter Motors ] [ Suspension ] [ Wipers ] [ Links ]